We inspect the roof with a thermal imaging camera and moisture meter, identify the foam type, and check for roof rot or hidden leaks. You get a fixed written price and a start date, usually within 48 hours of your call.
Our Services
Spray foam removal services across Harrogate
Whether it is a small loft in Starbeck or a full commercial roof in Harrogate, we handle every type of spray foam removal Harrogate properties need. We use dry ice blasting machines, oscillating multi-tools and industrial vacuums to strip foam cleanly, then check the timbers with a boroscope and thermal imaging camera before we call the job done. If you have been searching for affordable spray foam removal near me in Harrogate, this is the list to work through.
01
Upfront optionsNo work before you approve it
02
Respectful serviceClean floors, clear communication
03
Real guaranteesRepairs backed in writing
04
Local techniciansLicensed local professionals
What we do
Spray foam removal services across Harrogate
Whether it is a small loft in Starbeck or a full commercial roof in Harrogate, we handle every type of spray foam removal Harrogate properties need. We use dry ice blasting machines, oscillating multi-tools and industrial vacuums to strip foam cleanly, then check the timbers with a boroscope and thermal imaging camera before we call the job done. If you have been searching for affordable spray foam removal near me in Harrogate, this is the list to work through.
Spray Foam Removal near me
If you are searching for spray foam removal near me in Harrogate, this is the core service. We cut out foam from rafters, purlins and roof decks, bag it, and vacuum the loft clean. Most lofts take one to two days depending on foam thickness and access.
Explore →
same day Spray Foam Removal
We keep same day spray foam removal Harrogate slots open for urgent cases, usually mortgage deadlines or a surveyor coming back. Call before 10am and we can often have a technician on your roof that afternoon with a spray foam removal saw and dust extraction unit.
Explore →
24/7 Spray Foam Removal
Storm damage, a leak appearing under foam, or a lender deadline that cannot wait until Monday. Our 24/7 spray foam removal in Harrogate North Yorkshire line stays open, and we can mobilise a crew out of hours for emergency foam extraction and temporary weatherproofing.
Explore →
Residential Spray Foam Removal
Homes across Bilton, Jennyfields, Oatlands and West Park have had spray foam pumped into lofts over the years, and much of it now needs to come out. We work room by room, protect carpets and loft boards with protective sheeting, and keep the dust contained.
Explore →
Commercial Spray Foam Removal
Warehouses, farm buildings and office roofs around Harrogate often carry thick polyurethane foam that has trapped moisture for years. We work around your operating hours, use air scrubbers to keep the site clean, and provide method statements and risk assessments before we start.
Explore →
loft spray foam removal
Loft spray foam removal Harrogate North Yorkshire homeowners ask for most often. We remove foam from between and over rafters, check for roof rot and timber decay underneath, and leave the loft ready for new insulation or a clear surveyor inspection.
Explore →
roof spray foam removal
Foam sprayed directly onto the underside of roof tiles or slates is the hardest to remove without damage. We use a spray foam removal saw and hand tools to work it back carefully, then treat any exposed timber before the roof is closed up again.
Explore →
Attic spray foam removal
Attics in older Harrogate stone-built homes often have foam packed tight against the sarking boards. We cut it out in sections, run a boroscope along the rafters to check for hidden leaks, and record everything with photos for your lender or surveyor.
Explore →
spray foam insulation removal
Full spray foam insulation removal means stripping the foam, cleaning the timber, and disposing of it as controlled waste. We handle open cell and closed cell foam, plus polyisocyanurate foam, and provide a waste transfer note on completion.
Explore →
open cell spray foam removal
Open cell spray foam is softer and comes out faster than closed cell, but it still traps condensation against the roof deck. We cut it back with an oscillating multi-tool, vacuum the residue, and check the moisture meter readings before signing off.
Explore →
closed cell spray foam removal
Closed cell spray foam sets like concrete and needs a spray foam removal saw plus dry ice blasting machine to shift it without gouging the rafters. It is slow, dusty work, and we allow a full day for a typical Harrogate loft.
Explore →
mortgage lender spray foam removal
Most lenders will not release funds while spray foam is in the roof, and surveyors flag it as a defect. We produce a removal report with before and after photos, moisture readings and timber condition notes that satisfies mortgage lender spray foam removal requirements.
Explore →
insulation removal service
Our insulation removal service covers spray foam, old mineral wool and contaminated loose fill. We bag everything, run a dust extraction unit throughout, and leave the loft clear so you can start again with a breathable insulation system.
Explore →
insulation assessment
Before any work starts we carry out an insulation assessment using a thermal imaging camera, moisture meter and boroscope. You get a written report on foam type, timber condition and whether removal is genuinely needed, usually within 48 hours.
Explore →
dry ice blasting spray foam removal
Dry ice blasting spray foam removal uses dry ice pellets fired at the foam surface to freeze and crack it away from the timber. It is the cleanest method for delicate sarking boards and historic roofs, with no sand blasting media to sweep up afterwards.
Explore →
Cavity wall spray foam removal
Cavity wall spray foam removal is a different job to loft work and needs a borescope survey first to map where the foam sits. We drill, extract and re-point, then check the cavity is clear so the wall can dry out and breathe again.
Explore →
sand blasting spray foam insulation removal
For stubborn foam bonded hard to brick or stone, sand blasting spray foam insulation removal strips it back to the substrate. We use controlled sand blasting media, full PPE and respirators, and sheet off the area to contain every bit of dust.
Explore →
thermal spray foam removal
Thermal spray foam removal covers foam that has been heat-applied or has cured hard against a warm roof deck. We use thermal imaging camera readings to map the foam, then cut it back in controlled sections so the deck is not stressed.
Explore →
environmentally friendly insulation removal
Environmentally friendly insulation removal means we separate foam, timber waste and packaging for recycling wherever possible. Dry ice blasting cuts chemical use, and every load leaves site with a waste transfer note so you can see where it went.
Explore →
Warehouse spray Foam removal
Warehouse spray foam removal around Harrogate often runs to thousands of square metres of roof deck. We phase the work around your shifts, use air scrubbers and dust extraction units, and can work nights or weekends to keep your operation running.
Explore →
From call to complete
How our spray foam removal works
We sheet off the loft, seal doorways and set up dust extraction units and air scrubbers. Carpets, loft boards and anything stored up there are covered before a single piece of foam comes out.
Foam comes out with a spray foam removal saw, oscillating multi-tool or dry ice blasting machine depending on how hard it has set. We bag it as we go and vacuum the timbers down to bare wood.
We run a boroscope along the rafters, take moisture readings, and photograph everything. You get a written removal report suitable for your lender or surveyor, plus a waste transfer note for the foam we took away.
STEP 01Survey and quote
We inspect the roof with a thermal imaging camera and moisture meter, identify the foam type, and check for roof rot or hidden leaks. You get a fixed written price and a start date, usually within 48 hours of your call.
Our standard
Why Harrogate calls us for spray foam removal
Spray foam removal is messy, dusty work and it is easy to get wrong. We have spent five years doing nothing else, so we know exactly how much timber we can save, when a roof is too far gone, and how to keep a lender happy. Here is what that looks like in practice.
Accredited and fully insured
We hold BPCA, CHAS, SafeContractor and Constructionline accreditation, and our technicians carry NVQ and City & Guilds qualifications. Every job is covered by public liability insurance, and we provide method statements and risk assessments before we start on site.
Same-day quotes, no charge
Call before 10am and we can usually survey your roof the same day. You get a fixed price in writing, a clear scope of what comes out and what stays, and a start date. No hidden extras, no vague day rates, no surprise invoices at the end.
We protect the roof, not just the foam
Anyone can rip foam out. We cut it back with a spray foam removal saw, check the rafters with a moisture meter and boroscope, and treat any early timber decay before it spreads. If you need spray foam removal near me in Harrogate and want the roof saved, this is how we do it.
Good questions
Spray foam removal questions, answered
These are the questions we get asked most often by Harrogate homeowners and landlords. If yours is not here, call us on 0333 567 2543 and we will give you a straight answer.
03335672543 →Typical 2026 prices in Harrogate run from 950 to 1,800 pounds for a standard loft and 1,800 to 4,500 pounds for a full roof, depending on foam type, thickness and access. Closed cell foam takes longer to cut out than open cell, and commercial decks are priced per project. We survey first and give you a fixed written price before any work starts.
Look for a company that only does foam removal, carries CHAS or SafeContractor accreditation, and gives you a written report with photos and moisture readings for your lender. We have been doing this in Harrogate since 2021, hold BPCA, CHAS and Constructionline accreditation, and every job comes with a waste transfer note and a timber condition report.
In most cases, yes. Lenders and surveyors treat spray foam in a roof as a defect because it traps condensation and hides timber decay. We produce a removal report with before and after photos, moisture meter readings and boroscope notes that satisfies the lender's requirements. Most Harrogate cases are cleared within a week of the survey.
Yes, we keep same day slots open for urgent cases, usually a mortgage deadline or a surveyor returning. Call before 10am and we can often have a technician on your roof that afternoon. For larger roofs we may need a full day, but the survey and written quote can still happen the same day you call.
Ask three things: do they only remove foam, can they show you a sample lender report, and are they accredited with CHAS, SafeContractor or Constructionline. Check they use dust extraction and air scrubbers rather than just ripping foam out, and confirm you get a waste transfer note. We answer all three on the first call.
Ready when you are
Need spray foam removal in Harrogate this week?
We survey, quote and start fast, and we have been doing spray foam removal in Harrogate since 2021. Call 0333 567 2543 and we will tell you straight what needs to come out and what it will cost.
Call for a quote →
Request an appointment
Contact our Harrogate team
Call us on 0333 567 2543 or email [email protected] and we will get back to you the same working day. Our phone line stays open 24/7 for emergency foam removal, and we can usually survey your roof within 48 hours of your first call.